天津市电缆总厂橡塑电缆厂
13

13731622776

当前位置:天津市电缆总厂橡塑电缆厂>>低压电力电缆>>YJLV低压铝芯电力电缆>> 铝芯铠装高压电缆-YJLV22-10千伏-3*120

铝芯铠装高压电缆-YJLV22-10千伏-3*120

参  考  价面议
具体成交价以合同协议为准

产品型号

品       牌小猫牌

厂商性质生产商

所  在  地廊坊市

更新时间:2023-08-17 17:19:06浏览次数:680次

联系我时,请告知来自 食品机械设备网

郝进生

销售部经理
扫一扫,微信联系
同类优质产品更多>
铝芯铠装高压电缆-YJLV22-10千伏-3*120产品说明信息图片可能与型号规格不太相符,如果您需要更详细了解本产品的相关信息可以索取相关资料或致电

铝芯铠装高压电缆-YJLV22-10千伏-3*120

本产品按GB12706《额定电压35V及以下铜芯、铝芯塑料绝缘电力电缆》标准生产,同时还可根据用户需要按电工委员会推荐标准IEC、英国标准、德国标准及美国标准生产。
The product is manufactured according to the standard ofGB12706 or IECBSDIN and ICEA upon request.
适用范围 Applications
  本产品适用于工频额定电压3.6/6kv26/35kv输配电线路作配送电能子用。
The product is suitable for use in power transmission and distribution lines with rated power frequency voltage 3.6/6kv26/35kv.
使用特性 Operating characteristics
· 工频额定电压U0/U3.6/6kv26/35kv
Rated power-frepuency voltage U0/U: 3.6/6kv26/35kv.
· 电缆导体的zui高允许工作温度:90
Max.admissible operating temperature of the conductor:90.
· 短路时(zui长时间不超过5s)电缆导体的zui高温度不超过2500C
Max. short-circurt temperature of conductor shall not exceed 2500C.
(5s maximum duration)
· 电缆敷设时环境温度应不低于00C
The ambient temperature under installation should not below 00C.
· 电缆弯曲半径:三芯电缆不小于电缆外径15倍;单芯电缆不小于电缆外径20倍。
The bending radius of a single-core cable should not less than 20 times of the cable diameter.
The bending radius of a single-core cable should not less than 15 times of the cable diameter.
电缆额定电压的选择 Voltage designation
· 电缆的额定电压应适合于电缆系统的运行状况,用U0/UUmkv表示。
U0-电缆设计用的导体对地或金属屏蔽之间的额定工频电压;
U-电缆设计用的导体间的额定工频电压;
Um-设备可承受的zui高系统电压"的zui大值。
The rated voltage of the cable for a given applixation shall be suitable for the operating conditions
in the system in which the cable is used,and is expressed in the form of U0/UUmkv
Where: 铝芯铠装高压电缆-YJLV22-10千伏-3*120
U0The rated power-frequency voltage between conductors and earth metallic screen ,for which the cable designed;
U The rated power-frequency voltage between conductos, for which the cable designed;
UmThe maximum value of thehighest system voltage"for which the equipment may beused.
· 三相系统用电缆的U0值推荐如下表:
The values of U0 recommened for cable to be used in three-phase systems are listed below:

 

U kv

U m kv

U 0 * kv

A B 类系统 System categories A and B

C 类系统 Systems categories C

6

7.2

3.6

6

10

12

6

8.7

15

17.5

8.7

12

20

24

12

18

30

36

18

35

40.5

21

26

 

A类系统──该类系统任何一相导体与地和接地导体接触时,能在1min内与系统分离
B类系统──该类系统仅包括单相接地故障短时运行的条件,接地故障时间应不超过1h, 但在任何情况下,zui长不超过8h每年接地故障总持续时间不超过125h
C类系统──不属于A类、B类的系统。
System category A──This category comprises those systems in which any phase conductor that comes in contact with earth or an earth conductor. is disconnected from the system within 1 min.
System category B ──This category comprises those system which,under faultconditions,are operated,are operated for ashorttimewith one phase earthed.This period should not exceed 1 h..Fora longer period, not exceeding 8h on any occasion, can be tolerated.The total duration of earth faults in any year should not exceed 125h.
System categeory C──This category comprises all systems which do not fall into A and B
电缆的型号Type of cable

型号 Type

名称 Designation

适用范围 Application

YJV

铜芯交联聚乙烯绝缘氯乙烯护套电力电缆 Copper conductor,XLPE insulated and PVC sheathed power cable

室内、隧道及电缆沟等场所,不能承受机械外力。单芯电缆不允许敷设在磁性管道中。 For laying indoors intunnel or cable trench,unable to bear external mechan-icalforces.Single-core cable in magnetic duct is not permissible

YJLY

铝芯交联聚乙烯绝缘乙烯护套电力电缆 Aluminium conductor, XLPE insulated and PVC sheathed power cable

YJY

铜芯交联聚乙烯绝缘氯乙烯护套电力电缆 Copper conductor ,XLPE insulated and PEsheathed power cable

YJLY

铝芯交联聚乙烯绝缘氯乙烯护套电力电缆 Alumimium conductor ,XLPE

 

产品介绍:高压交联电缆产品具有传输容量大,工作温度,不受落差的限制,安装敷设方便等特点,广泛应用于工矿企业和城市电网中。高压交联电缆主要用于电力、建筑、工矿、冶金、交通等部门的动力、照明输配电系统,由于聚乙烯是电绝缘性能的塑料,加上经过高分子交联后成为热固性材料,因此其电性能好,机械性能和耐热性好。近二十年来,已成为中国中、高压电缆的主导品种,产品适用于6——35KV的各个电压级中它可分为:YJV-交联聚乙稀绝缘聚氯乙烯护套电力电缆,YJV22-交联聚乙烯绝缘钢带铠装高压电缆,YJLV-交联聚乙烯绝缘铝芯钢带铠装高压电缆。
执行标准:GB/T12706-2002
使用特性
· 工频额定电压U0/U6kv/10kv26/35kv
· 电缆导体的zui高允许工作温度:90℃
· 短路时(zui长时间不超过5s)电缆导体的zui高温度不超过2500C
· 电缆敷设时环境温度应不低于00C
· 电缆弯曲半径:三芯电缆不小于电缆外径15倍;单芯电缆不小于电缆外径20倍。
电缆额定电压的选择
· 电缆的额定电压应适合于电缆系统的运行状况,用U0/UUmkv表示。
U0-电缆设计用的导体对地或金属屏蔽之间的额定工频电压;
U-电缆设计用的导体间的额定工频电压;
Um-设备可承受的zui高系统电压"的zui大值。

会员登录

×

请输入账号

请输入密码

=

请输验证码

收藏该商铺

X
该信息已收藏!
标签:
保存成功

(空格分隔,最多3个,单个标签最多10个字符)

常用:

提示

X
您的留言已提交成功!我们将在第一时间回复您~
拨打电话
在线留言