产品展厅收藏该商铺

您好 登录 注册

当前位置:
上海庆精阀门有限公司>>OLESVALVE>>OLES进口杠杆式疏水阀(德国OLES奥莱斯阀门)

进口杠杆式疏水阀(德国OLES奥莱斯阀门)

返回列表页
  • 进口杠杆式疏水阀(德国OLES奥莱斯阀门)

收藏
举报
参考价 面议
具体成交价以合同协议为准
  • 型号 OLES
  • 品牌
  • 厂商性质 生产商
  • 所在地 上海市

在线询价 收藏产品 加入对比

更新时间:2019-07-17 23:00:40浏览次数:204

联系我们时请说明是食品机械设备网上看到的信息,谢谢!

联系方式:叶经理查看联系方式

产品简介

材质 碳钢,不锈钢,黄铜,铸铁,铸钢,铸铜,球墨铸铁,合金钢,铜合金,塑料,陶瓷,铜,PVC,PPR,衬氟,其他 公称通径 .mm
公称压力 .MPa 连接形式 法兰
压力环境 常压 种类 浮球式
进口杠杆式疏水阀(德国OLES奥莱斯阀门)

【进口杠杆式疏水阀】详细说明:

杠杆浮球式蒸汽疏水阀,该阀刚启动时,自动排空气装置迅速排除系统中不凝结气体。当蒸汽和热凝结水进入后,阀腔内温度随着升高,排空气装置自动关闭,浮球根据凝结水水位的变化而作升降,带动杠杆调节阀座孔的开度,连续排放凝结水

详细介绍

进口杠杆式疏水阀(德国OLES奥莱斯阀门)

【进口杠杆式疏水阀】详细说明:

杠杆浮球式蒸汽疏水阀,该阀刚启动时,自动排空气装置迅速排除系统中不凝结气体。当蒸汽和热凝结水进入后,阀腔内温度随着升高,排空气装置自动关闭,浮球根据凝结水水位的变化而作升降,带动杠杆调节阀座孔的开度,连续排放凝结水。当凝结水停止进入时,浮球靠自重下降,驱使杠杆带动阀芯关闭排水阀座孔。用于蒸汽加热设备和凝结水回收系统及需要快速排除凝结水的工况,能自动、迅速、连续地排除凝结水,有效地阻止蒸汽泄漏,并获得的加热效果。

进口疏水阀作用:当蒸汽冷凝时释放蒸发焓形成冷凝水,冷凝水中只含有饱和水焓,为了确保系统的大传热效率,冷凝水必须从系统中排除。蒸汽中所携带的空气和其它不凝性气体在蒸汽和换热面上形成热阻层同样也必须从系统中排除。疏水阀的基本作用是将蒸汽系统中的凝结水、空气和二氧化碳气体尽快排出;同时大限度地自动防止蒸汽的泄漏。

Lever floating ball steam trap, when the valve is just started, the automatic air exhaust device quickly removes the non-condensable gas in the system. When the steam and thermal condensate water enter, the temperature in the valve chamber increases, the exhaust air device automatically closes, and the float ball rises and falls according to the change of condensate water level, driving the lever to adjust the opening of the valve seat hole, and continuously discharges the condensate water. When the condensate water stops entering, the float ball drops by its weight, driving the lever to drive the spool to close the drainage seat hole. Used in steam heating equipment and condensate water recovery system and working conditions requiring rapid removal of condensate water, condensate water can be automatically, rapidly and continuously removed, effectively prevent steam leakage, and obtain the best heating effect.

 

Import trap function: When steam condensates, evaporation enthalpy is released to form condensate water, which contains only saturated enthalpy. In order to ensure the maximum heat transfer efficiency of the system, condensate must be removed from the system. The air and other non-condensable gases carried in the steam must also be removed from the system to form a thermal resistance layer on the steam and heat exchange surface. The basic function of the trap is to expel the condensate water, air and carbon dioxide gas from the steam system as soon as possible, and at the same time to prevent the leakage of steam to the maximum extent automatically.

【进口杠杆式疏水阀】特性:

①能连续排放饱和凝结水加热设备不会有水积聚,从而获得zui高的热效率;

②蒸汽压力变化时不受影响浮球带动杠杆自动调节阀座孔的开度,工作连续,性能稳定;

③排空气性能好自动排空气装置能排除不凝结的冷热气体,无气锁现象,工作平稳无噪音;

④密封性能,密封面采用球面结构,工作时无集中磨损,使用寿命长。

 

 

杠杆浮球式蒸汽疏水阀用途特点

(一)杠杆浮球式蒸汽疏水阀用途:

杠杆浮球疏水阀,广泛用于工业蒸汽加热设备,各种大型热交换器及干燥机、夹套锅等,特别应用于冷凝水特大排量在的工作场合.

(二)杠杆浮球式蒸汽疏水阀特点:

此超大排量型蒸汽疏水阀,在整个工作压力范围内无需调整和更换内件,即可充分排除大量的疑结水。排水过冷度可达0℃,特别适合用于疑结水量大的工作场合。                                

 

 

收藏该商铺

登录 后再收藏

提示

您的留言已提交成功!我们将在第一时间回复您~

对比框

产品对比 二维码 意见反馈

扫一扫访问手机商铺
在线留言