浙江睿创晟业电气有限公司

当前位置:浙江睿创晟业电气有限公司>>电力电容器>>防护电容器>> FFMFFM系列防护电容器

FFM系列防护电容器

参  考  价面议
具体成交价以合同协议为准

产品型号FFM

品       牌

厂商性质生产商

所  在  地温州市

联系方式:胡经理查看联系方式

更新时间:2021-06-21 14:08:07浏览次数:751次

联系我时,请告知来自 食品机械设备网
同类优质产品更多>
FFM系列防护电容器
FFM 型防护电容器可与高压电阻串联构成RC过电压吸收装置,适用与交流35KV 输配电系统中吸收因真空断路器( 或其它不重击穿的开关)开合时产生的过渡过电压,以保护系统内高压电器产品受电压的损害,本产品还可当作高压电容在其他场合下使用。

FFM系列防护电容器

用途及适用范围 use and application
  FFM 型防护电容器可与高压电阻串联构成RC过电压吸收装置,适用与交流35KV 输配电系统中吸收因真空断路器( 或其它不重击穿的开关)开合时产生的过渡过电压,以保护系统内高压电器产品受电压的损害,本产品还可当作高压电容在其他场合下使用。

  FFMmodel protection capacitorwith high voltage resistancein series being RC is comp osedofvoltage absorption device,itfitswellwith 35kv electric system.due to vacuum breaker(or other non-heavy switch),it produces the transition voltage to protect the product with high voltage from damaging,it is also used on other occasions with high voltage capacitor.

型号说明 model meanings

型号

额定电压
Un/Kv

额定电容
Cn/uF

备注

型号

额定电压
Un/Kv

额定电压
Cn/uF

FFM6.6/√3-0.3

6.6/√3

0.3

 

FFM4.62-25

6.6/√3

0.3

FWF10.5/√3-0.1

10.5/√3

0.1

 

FFM4.65-25

10.5/√3

0.1

FWF10.5/√3-0.2

10.5/√3

0.2

 

FFM6.9-0.5

10.5/√3

0.2

主要技术指标 main techniqueindessign
1. 电容偏差-5~+10%;
2. 损耗角正切值tan δ<0.05%;
3. 电介质的电容强度2.15μ,历时1min;
4. 其余技术要求均按照《GB.T4704-32 高压并联电容器》。
1.Capacitance Deviation:-5~+10% ;
2.Tangent of Loss Angle tanδ<0.05% ;
3.Electrical Strenth of Dielectric Medium 2.1 5μ Last a period of time:1min;
4.The other technology requirementis accordingto" GB.T4704-32High Voltage Shunt Capacitor".

使用条件 servicecondition
1. 电容器安装运行的海拔高度不超过1000m,环境空气温度为-40~+40℃。相对湿度不大于90%。
2. 安装场所应无腐蚀气体、蒸气和导电性或爆炸性尘埃,并无剧烈的机械振动。
3. 电容器投入运行时,其端子上的剩余电压不超过额定电压的10%。
4. 过载荷
4.1 稳定过电压
续运行电压时1.00μn,并能在1.2μn,工频过电压下*运行。
4.2 操作过电压
电容器的承受不重击穿开关所产生的1.5μn 的过渡过电压( 峰值)。
4.3 稳态过电流
电容器能在1.5In 稳态过电流下运行,这个过电流是由于谐波及,zui大容差和高至1.2In 的过电流共同作用的结果。
1.Height a bove sea level of capacitor’s installation and
shipping is not more than 1000m. Env ironmental air
temperature is-40 ℃ ~+40 ℃ Relative humidity is not more than 90% ;
2.There is no corruption gas,smoke,conductive or explosive dust,acute machine tremor in iastallation location no harmfuI gas or smoke.no conductive performance or acute tremor;
3.When cap a citors run,the spare voltage of its terminal is not more than10% of rated voltage;
4.Over Loading
4.1 Stabilization Voltage
   Stabilization voltage can continuously run ac the Voltage of 1.00μn and can also lastingly run at the industrial frequency voltage of 1.2μn.
4.2 Operated Voltage
   The bearing capacitor should not heav ily punch switch produced transition Voltage of 1.5μn(buzzing valuel).
4.3 Steady State Electricity
   Capacitor can be operated underthe 1.5In steady current. Duetcits harmonious wave,the result of current caused the max difference and height of 1.2In together.

客户订做如有尺寸要求需提供以下数据 Size of customer requirements to be made if the following data
如需底脚安装请特别说明!

FFM系列防护电容器

 

会员登录

×

请输入账号

请输入密码

=

请输验证码

收藏该商铺

X
该信息已收藏!
标签:
保存成功

(空格分隔,最多3个,单个标签最多10个字符)

常用:

提示

X
您的留言已提交成功!我们将在第一时间回复您~
在线留言