0400R003BN4HC

HYDAC贺德克滤芯产品滤芯型号
 
D系列：
 
0030D系列  0060D系列  0110D系列  0140D系列  0160D系列
 
0240D系列  0280D系列  0330D系列  0500D系列  0660D系列
 
0990D系列  1320D系列
 
R系列：
 
0030R系列  0060R系列  0110R系列  0160R系列  0240R系列
 
0330R系列  0500R系列  0660R系列  0850R系列  0950R系列0400R003BN4HC
 
1300R系列  1700R系列  2600R系列0400R003BN4HC
 
DN系列：
 
0040DN系列  0063DN系列  0100DN系列  0160DN系列
 
0250DN系列  0400DN系列  0630DN系列  1000DN系列
 
RN系列：
 
0040RN系列  0063RN系列  0100RN系列  0160RN系列
 
0250RN系列  0400RN系列  0630RN系列 Fluid Management
Package concept for all aspects of fluid and components.
By entering into a full-service or maintenance contract, you will receive a coordinated package of services – from the supply of media and components, through engineering to hydraulics and facility services that are geared towards the following objectives: savings in maintenance costs, savings in investments and labour cost optimization. Fluid engineering means an increase in process reliability, taking proven technologies into account.
Technical services
With regard to specifications, spare parts, repair, maintenance and optimisation of oils, water, lubrication, cooling lubricants and air. We analyze your production and servicing workflow from the technical and commercial point of view of fluid power technology and make a critical analysis of existing concepts and cost accounting. In this way, we move from the individual examination of the medium or component to a holistic approach.
From the idea to the implementation. An idea alone is not a guarantee for success. The HYDAC Service Centre ‘accompanies’ you in every step of the implementation. Fluid engineering is a dynamic process that must be continuously monitored for its suitability. Here, you can rely on the HYDAC Service Centre with a team made up of fluid managers, team leaders and service staff.
Optimisation and Planning
Increasing operational availability and  productivity.
Technical progress waits for no-one. In many applications, machines purchased today can no longer produce the quality required tomorrow. Instead of buying new, an excellent alternative, both technically and in terms of cost, is often to convert and modernize the components and systems used.
By examining the hydraulic system in partnership, we can find potential for optimisation together. In other words, we can generate a reduction in costs and an increase in productivity and operational availability, with results to match.
Condition Monitoring
CM-Expert is a high-performance monitoring / archival and control system for Condition Monitoring which can be installed on any standard PC.
Its decentralized configuration makes the system extremely reliable and flexible for use in production systems. As regards connecting sensors, operating and signal components, control tasks and data exchange with other
systems, by using the data acquisition unit (MDE), no limits are placed on the system. All common physical parameters can be recorded by the MDE and processed by the CM-Expert: temperature, pressure, differential pressure, viscosity, water content, particles, flow rate, etc.
Areas of application:
Steel works
Wind turbines
Plastics machinery
Paper machines
Machine tools
Hydraulic presses
Test stands and all other production processes requiring monitoring
Online Monitoring of production systems. Directly on-site or via remote access! Our ‘remote’ version of the CM-Expert is perfectly applicable to wind energy, offshore applications and hydraulics. It informs the operator in real time about the condition of their system and initiates service exactly when it is needed. Unnecessary (and thus expensive) maintenance has now become obsolete!
Your advantages:
Continual monitoring and logging of the ambient conditions and the automated messages from the production media when defined service limits are reached (e.g. filter change)
Immediate warning when defined limits are exceeded
Avoids unnecessary maintenance on systems where access is difficult
Prevention of major breakdowns by means of early detection
Optimisation of the maintenance intervals
Reduction of the maintenance and repair costs
Prevention of downtime
Prevention of consequential damage.
Calibration
Optimise the quality of your test equipment by using the calibration service at HYDAC Service Centre.
In order to guarantee that all the test equipment measure accuray under controlled parameters, they must be calibrated regularly with the calibration process traceable to national measurement standards, and the results documented and certified.
We calibrate the following equipment: CS and FCU (1000 and 2000 series).
Fluid Analytics
The condition of the fluid is crucial for optimum machine performance today. This means that the fluids must be monitored and tested.
Tests required:
Oil analysis
Cleanliness determination and analysis, internal company standards for the automotive and supplier industryParticle distribution measurement acc. ISO 4406 and SAE AS: 4056
Determination of water content according to the Karl Fischer method
Microscopic analysis
Gravimetric analysis
Granulometric analysis
Density
Viscosity
TAN (Total Acid Number)
Coolant / lubricant analysis and water analysis (pH-value, conductivity, bacteria, chlorite, nitrate, nitrite, ° dH)
REM/EDX analyses
Process chain analysis
Process Optimisation
HYDAC can bring its many years of experience in the fluid industry to your production, performing on-site process chain analyses.
Process chain analyses define the state of technical cleanliness in the production process. We locate your potential for optimisation and develop measures to further improve component cleanliness values.
Technical Cleanliness
From a clean component to a technically clean system.
Technical cleanliness is becoming increasingly important in many sectors of industry, the automotive industry, hydraulics and production systems. Phrases such as ‘reduction and avoidance of start-up breakdowns’ and the difficulty of ever-increasing warranty periods are driving the demands for component cleanliness.
Suppliers and producers of complete systems are required to meet more demanding technical cleanliness standards for their products and systems.
We perform lab analyses as well as internal company standards, and perform site process chain analyses.
Rental Service
Hire the equipment as you need it. Instead of tying up capital unnecessarily.
When equipment is only required for short periods, there is understandable opposition to making any costly investment.
Hiring the equipment is an economical and flexible alternative.
Whenever you need a piece of equipment, a measuring unit or a filtration system – it’s there ready for you! All units are maintained and checked regularly and are therefore always ready for operation.
Our specialists will be pleased to advise you in advance on selecting the best unit for your application. We will ensure that the hire equipment will be available on schedule, and therefore that your project runs smoothly.
Dewatering systems
Flushing units
Filtration units
Nitrogen service units
FPU Assembly units
Bending machines
Flanging machines
Measurement devices