Fann 209570 500ml高温高压失水仪样品杯

　　美国Fann 209570 HPHT压滤机配件500ml高温高压失水仪样品杯

　　This Rheometer Cup Heater is intended for controlling temperature of a drilling fluid sample while taking readings with a Rheometer or Viscometer. The low thermal conductivity of a drilling fluid requires that it be agitated while heating in order to reach a uniform temperature in a reasonable length of time.

　　该流变仪杯加热器用于在用流变仪或粘度计读数时控制钻井液样品的温度。钻井液导热系数低，要求在加热过程中进行搅拌，使其在合理的时间内达到均匀的温度。

　　82839536 比重计 OFI 115-00

　　83107124 加热套 Fann 206966

　　82651450 500ml高温高压失水仪样品杯 Fann 209570

　　82651457 175ml高温高压失水仪样品杯 Fann 209569

　　83107123 175ml高温高压失水仪加热套 Fann 209506

　　83107123 500ml高温高压失水仪加热套 Fann 209541

　　81972339 滚子炉老化罐 OFI 175-50

　　81490030 老化罐杯体内聚四氟O型圈 OFI 175-09-1

　　81490030 老化罐杯体外部O型圈 OFI 175-46

　　81972341 直径3/8英寸固定螺钉 OFI 175-14

　　81972340 阀杆 OFI 175-16

　　Safe operation of the Cup Heater requires the operator understand and practice the correct assembly and operation of the equipment. Improper assembly, operation, or the use of defective parts could result in serious injury and damage. Do not immerse the Cup Heater in water for cleaning. Immersing the unit in water could cause electrical problems, damage to the equipment and possible serious injury. Cup Heaters are electrically heated, and as with any electrical device if the wiring is allowed to become faulty, electrical shorts can occur causing damage to the instrument and possible injury to the operator. These instruments should always be used on a grounded circuit.

　　杯形加热器的安全操作要求操作者理解并实践正确的设备装配和操作。不正确的组装、操作或使用有缺陷的部件可能导致严重的伤害和损坏。不要将热水器浸入水中清洗。将本机浸入水中可能会导致电气问题、设备损坏和可能的严重伤害。杯形加热器是电加热的，与任何电气设备一样，如果允许线路出现故障，可能会发生电气短路，对仪器造成损坏，并可能对操作者造成伤害。这些仪器应始终在接地电路中使用。

　　Fann Instrument Company warrants only title to the equipment, products and materials supplied and that the same are free from defects in workmanship and materials for one year from date of delivery. THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED OF MERCHANTABILITY, FITNESS OR OTHERWISE BEYOND THOSE STATED IN THE IMMEDIATELY PRECEDING SENTENCE. Fann's sole liability and Customer's exclusive remedy in any cause of action (whether in contract, tort, breach of warranty or otherwise) arising out of the sale, lease or use of any equipment, products or materials is expressly limited to the replacement of such on their return to Fann or, at Fann's option, to the allowance to Customer of credit for the cost of such items. In no event shall Fann be liable for special, incidental, indirect, consequential or punitive damages. Notwithstanding any specification or description in its catalogs, literature or brochures of materials used in the manufacture of its products, Fann reserves the right to substitute other materials without notice. Fann does not warrant in any way equipment, products, and material not manufactured by Fann, and such will be sold only with the warranties, if any, that are given by the manufacturer thereof. Fann will only pass through to Customer the warranty granted to it by the manufacturer of such items.

　　凡仪器公司仅对所提供的设备、产品和材料享有所有权，并保证自交货之日起一年内不存在工艺和材料上的缺陷。没有任何保证，明示或暗示的适销性，适用性或其他超出前一句所述。范氏的责任和客户的补救行动的任何原因(无论是在合同,侵权,违反保证或其他)引起的销售、租赁或使用的任何设备、产品或材料明确仅限于更换他们回到范氏,或者在范氏的选项,补贴信贷客户的这些物品的成本。在任何情况下，范恩不应对特殊、偶然、间接、后果性或惩罚性损害赔偿负责。尽管在其产品制造中使用的材料的目录、文献或小册子中有任何规格或说明，但范方保留在不另行通知的情况下替换其他材料的权利。Fann不以任何方式担保非Fann制造的设备、产品和材料，且该等设备、产品和材料仅在制造商提供的担保(如有)的情况下出售。范恩将只向客户提供由该等产品的制造商授予其的保证。

　　For your protection, items being returned must be carefully packed to prevent damage in shipment and insured against possible damage or loss. Fann will not be responsible for damage resulting from careless or insufficient packing. Before returning items for any reason, authorization must be obtained from Fann Instrument Company. When applying for authorization, please include information regarding the reason the items are to be returned.

　　为了您的安全，退货时必须小心包装，以防止货物在运输途中受损，并为可能的损坏或损失投保。凡因包装不小心或不充分而造成的损坏，范恩概不负责。因任何原因退货前，必须取得范氏仪器公司的*。申请*时，请注明退货原因。

　　HPHT Filter Press, Model 175CT simulates filtration against a permeable formation at high temperatures and pressures. Each 175 ml HPHT Filter Press consists of the following components and operating supplies: Stainless steel cell with CellTell?Positive Pressure Indicator Aluminum heating jacket Pressurization System (Nitrogen or CO2 ) Back Pressure Receiver, 15 ml Graduated cylinderFann 209570 500ml高温高压失水仪样品杯

　　高压压滤机，175CT模型模拟了在高温高压下对渗透性地层的过滤。每175毫升采用HPHT压滤机由以下组件和操作用品:?不锈钢细胞CellTell?积极压力指示器?铝加热套?增压系统(氮气或二氧化碳)?背压接收器,15毫升?量筒

　　Measuring filtration and cake-building properties is fundamental to treatment and control of drilling fluids. Studying filtrate characteristics, oil, water, or emulsion content, is also essential. For a drilling fluid, the quantity, type and size of solid particles, emulsified water, and properties of the liquid phase affect the filtration characteristics. Temperature and pressure may influence the interactions of these various components. Therefore, filtration tests are often performed at ambient and high temperatures, providing data for comparison.

　　测定钻井液的过滤性能和造块性能是钻井液处理和控制的基础。研究滤液特性、油、水或乳液含量也很重要。对于钻井液来说，固体颗粒的数量、类型和尺寸、乳化水以及液相的性质都会影响钻井液的过滤特性。温度和压力可能会影响这些不同组分之间的相互作用。因此，过滤试验通常在环境和高温下进行，为比较提供数据。

　　Wide range of customizing configurations for your specific needs HPHT safety features that help protect from hazards Heavy-duty components and materials that withstand HPHT conditions Pilot light on heating jacket that signals when temperature reaches thermostat setting Single or double opening cells that accept various filter media choices, such as API standard filter paper, ceramic discs of various porosities, and screens of various mesh sizes Choice of 115 volt AC or 230 volt AC heating jacket Pressurization alternatives, such as CO2 cartridges, nitrogen, or in-house source.Fann 209570 500ml高温高压失水仪样品杯

　　广泛的定制配置您的特定需求采用HPHT安全特性,帮助防止危害重型组件和材料采用HPHT承受条件指示灯在加热套信号当温度达到恒温器设置单引号或细胞接受各种过滤介质的选择,比如API标准滤纸,各种疏的陶瓷光盘,和各种网孔尺寸的屏幕，可选择115伏交流电或230伏交流电加热夹套加压替代方案，如二氧化碳管、氮气或内部源美国Fann 209570 HPHT压滤机配件500ml高温高压失水仪样品杯