低纹波DC/DC电源转换器SH10-24-24SSH10-24-15SSH10-24-5S SH10-24-12S SH10-48-5D SH10-48-12D SH10-48-15D 标准尺寸为1.25 x 0.8 x 0.44英寸 镀镍铜带非导电底座,六面金属外壳 工作温度:-25〜60度 2:1输入范围 调节输出 低纹波和噪声 低纹波 DC/DC电源转换器SH10-24-24S
Specification
1.All specifications valid at nominal input voltage,full load and +25°C after warm-up time unless otherwise stated. 2.Measured with 0.1U 50V // 47U 50V Ceramic Cap. Cross to output
Input Specification
Characteristics
Conditions
Voltage Range
2:1 Range:
9 ~ 18 VDC 18 ~ 36 VDC 36 ~ 75 VDC
Filter
type
Output Specification
Characteristics
Conditions
Output Power
10 Watt (max.)
Voltage Accuracy (Full Load and Nominal Vin)
Single:
±0.02
Dual:
±0.02
Minimum Load (at Full Load)
Line Regulation (LL to HL at Full Load)
Single:
±0.005
(typ.)
Dual:
±0.005
Load Regulation (LLto HL at Full Load)
Single:
3.3S: others:0.01
(typ.)
Dual:
±1%
Ripple (20MHz bandwidth)
3.3S:50mV (Vp-p) 5S~24S:1% Vout
(max.)
Dual:<0.2% Vout+20mV
Noise (20MHz bandwidth)
3.3S:50mV (Vp-p) 5S~24S:1% Vout
(max.)
Dual:<0.5% Vout+50mV
Temperature Coefficient
±0.02% / °C (max.)
Short Circuit Protection
Current limit, Auto-recovery
General Specification
Characteristics
Conditions
Switching Frequency
300K Hz (typ.)
Isolation Voltage (Input to Output)
1600 VDC (min.)
Operating Temperature
-25 ℃ to +60 ℃ (at Full Load)
Storage Temperature
-55°C to +105°C
Humidity
95% RH (max.)
Cooling
Free air convection
Physical Specification
Characteristics
Conditions
Dimension (Tolerance ±0.5)
31.8 x 20.3 x 11.2 mm
1.25 x 0.8 x 0.44 inches
Weight
20 g
Case Material
Nickel-Coated Copper with Non-Conductive Base, Six-side shielded