产品展厅收藏该商铺

您好 登录 注册

当前位置:
深圳市立翔制冷设备有限公司>>超低温冷冻箱>>超低温冰箱>>LXBX-120L LCD frozen separator freezer

LXBX-120L LCD frozen separator freezer

返回列表页
  • LXBX-120L LCD frozen separator freezer

收藏
举报
参考价 面议
具体成交价以合同协议为准
  • 型号
  • 品牌
  • 厂商性质 生产商
  • 所在地

在线询价 收藏产品 加入对比

更新时间:2022-03-20 11:55:51浏览次数:338

联系我们时请说明是食品机械设备网上看到的信息,谢谢!

联系方式:邓永辉查看联系方式

产品简介

ProductFeatures:产品特征:WiththeincreasingpopularityofsmartphonesdominatedbyAppleandSamsung,theapplicationofthekeycomponent---LCDtouchscreenisbeingincreasedlargerandlarger

详细介绍

Product Features: 产品特征:

With the increasingpopularity of smart phones dominated by Apple and Samsung, the application ofthe key component---LCD touch screen is being increased larger and larger.However, some defect products, like air bubbles, black spots, white spots, misplacement, will inevitably be produced during the LCD touch screen OCA/LOCAfull lamination process. But the cost of LCD touch screens is higher, whichmakes the related enterprises have the requirements of reworking LCD touchscreens.

随着智能手机的日益普及,苹果和三星占据主导地位,关键组件--LCD触摸屏的应用越来越大。然而,在LCD触摸屏OCA/LOCA全层压过程中不可避免地产生一些缺陷产品,如气泡、黑点、白点、错位等。但LCD触摸屏的成本较高,使相关企业有返修LCD触摸屏的要求。

LXBX series -150°C ultralow temperature LCD frozen separator freezer can cool down the touch screen bymeans of cold and heat exchanging through cold air in the chamber, which makethe OCA glue and optical glue loses viscosity at low temperature and separateout the LCD from the LCD screen module (that is the LCD screen is to beseparated from the TP or cover plate), or peel off TP or cover plate from theLCD screen module, recycle or renovate LCD or LCD panel.

LXBX系列-150°c超低温液晶显示冷冻分离器可通过室内冷空气冷热冷却触摸屏,使OCA胶和光学胶在低温下失去粘度,并将LCDLCD屏模块分离(LCD屏幕与Tp或盖板分离)。或从液晶屏模块中剥离tp或盖板,回收或翻新LCDLCD面板。

LXBX series -150°C ultralow temperature LCD frozen separator freezer has a variety of volumes from 50Lto 650L for users to choose from.

LXBX系列-150°c超低温液晶冷冻分离器,可供用户选择,体积从50升到650升不等。

LXBX series -150°Cultra low temperature LCD frozen separator freezer has a variety oftemperatures from -145 to -150, for users to choose from.

LXBX系列-150°c超低温液晶显示冷冻分离器有多种温度,从-145-150,供用户选择。

Temperature controlsystem: Microcomputer intelligent temperature controller, temperature digitalsetting, digital display. The temperature controller has password lockingfunction in case of mistuning by the irrelevant person.

温度控制系统:微机智能温度控制器,温度数字设定,数字显示。温度控制器具有密码锁定功能,以防被无关人员误用。

Heat insulating material:160mm thickness high pressure and high density foamed Polyamine Ester,effectively reduce the loss of cold capacity, multi-door seal off the coldcapacity, the whole chamber has good temperature preservation.

保温材料:160mm厚、高密度发泡聚胺酯,可有效降低冷量损失、多门封冷能力,整个腔体具有良好的保温性能。

The inner liner inside thecase is made of corrosion-proof embossed Aluminum plate or stainless steelplate. The surfaces of the plates are very smooth and clean. It has goodthermal conductivity and corrosion resistance.

箱内内衬采用耐腐蚀压花铝板或不锈钢板制成。这些盘子的表面非常光滑和干净。具有良好的导热性能和耐腐蚀性能。

Imported advancedrefrigeration compressor and accessories, can run continuously for 24hours,more stable refrigeration performance.

进口*的制冷压缩机及附件,可连续运行24小时,制冷性能更稳定。

Safety electricityprotection system equipped with ground wire, over heat protection, short circuitprotection, over current protection, high & low voltage protection, reversephase lack protection etc. Greatly ensure users’ safety.

带地线的安全电气保护系统,过热保护,短圈保护,过流保护,高电流保护。

Unique non-fluorine-freemixed refrigerant, energy saving and environmental protection.

*的无氟混合制冷剂,节能环保.


OperationInstructions: 操作说明

1.) Beforeusing, it will take the machine around 3040 minutes tocool to the set working temperature.

1.) 使用前,要花大约30~40分钟左右让机器冷却至设定工作温度。

2.) Place theLCD screen on the frozen plate.

2.) 将液晶屏放置在冷冻板上。

3.) Freezingtime from 30 seconds to 1 minute depends on different LCD screens.

3.) 冻结时间从30秒到1分钟取决于不同的液晶屏幕。

4.) Take outLCD screen and separate it.

4.) 取出液晶屏并将其分开。

5.) Below isthe URL of youtube video link for your reference:

5.) 以下是优酷视频链接的URL,供您参考:

/i/UMzYwNzc0OTg4NA==?spm=a2hzp.8244740.0.0


Tips: 提示

1.) Forserious crushed glass, please stick a tape on glass for safety and good formachine

1.) 如有严重碎玻璃,请在玻璃上贴上胶带,以确保安全及对机器有利。

2.) Pleasemake sure the operator wears gloves in case of danger.

2.)为防止发生危险,请确保操作人员戴手套。

3.) It is mucheasier to separate out the bracket and other components after freezingprocessing. Please pay attention to the back-light water inlet.

3.) 在冷冻处理后,更容易分离出支架和其它部件。请注意背光入水口。

4.) Afterseparating the LCD screen, pay attention to the water treatment and temperaturerecovery.

4.) 液晶屏分离后,注意水的处理和温度的回收。

5.) Whenseparating the curved screen, the separation risk caused by the temperature differencebetween 2 sides of the curved surface screen. Please pay more attention to thispoint.

5.) 曲线筛分离时,由于曲面屏两侧温差引起的分离风险。请注意这一点。

6.) After LCDseparation, please put the glue side upward to avoid sticking on the articlesurface after the temperature return to the normal.

6.) 液晶显示器分离后,请将胶水侧向上放置,以避免杂物粘在胶水表面上,并且让屏温度恢复正常。


Product Parameters:

Product description
-150°C Ultra low temperature LCD frozen separator freezer LXBX-120L
Model
LXBX-120L
Appearance overall size(MM)
1500*800*1100
Actual size of frozen(MM)
120L/540*400*560
Working voltage/frequency
380V/50HZ, 220V/60HZ
Power(KW)
6.5Kw
Cooling performance
-145°C-150°C
No-load pre-cooling time
≤3H
Refrigerant
Environmental mixed refrigerants
Cooling way
Air cooling
Lead time
Within 3 days
Warranty period
12 Months



本产品还可用于冷缩装配领域

冷缩装配箱/工件冷处理/铜套冷缩装配箱/深冷装配箱/模具冷缩装配/低温装配/轴承冷缩装配

深冷冰箱可在-150度以内调节,应用范围广泛,经常用在工业冷处理上。

主要体现在冷作模具钢和高速钢、轴承钢,冷作模具和模具配件的应用,该工业冷处理箱可以显著提升工件的硬度及强度,保证工件的尺寸精度,提高工件的耐磨性,提高工件的冲击韧性,改善工件内应力分布,提高疲劳强度,提高工件的耐腐蚀性能。

还应用于铜套、轴承等冷缩,广泛应用于精密机械装配上。在大型设备(汽车、大型工程机械、飞机部件、航天设备部件、军事设备部件超低温测试,也有着广泛的应用。

深冷冰箱在工业冷处理上的几大用途

提升工件的硬度及强度

保证工件的尺寸精度

提高工件的耐磨性

提高工件的冲击韧性

改善工件内应力分布,提高疲劳强度

提高工件的抗拉强度

提高工件的耐腐蚀性能

降低残余应力

冷缩装配箱

深冷装配箱

钢套冷缩装配

模具装配

联轴器冷缩装配

轴承冷缩装配箱

发动机冷缩装配

低温装配

利用热胀冷缩原理进行过盈装配

铜套冷缩装配箱

冷装配是利用制冷介质对需装入基孔内的零件*行冷却,使其外形尺寸收缩,从而产生装配间隙,

以便于零件轻松装配的一种装配方法。装配方法有三种:冷装配、热装配及压入装配。

冷装配与热装配、压入装配相比,优点如下: 1、安全性冷装配过程更安全可靠,工件不易受损。热

装配的工艺现场温度高,容易造成人员伤害;压入装配易使工件损坏。 2、工艺性冷装配质量高,工

件定心性好,承载能力强。热装配的质量不易控制,工件易变形;压入装配中零件与基孔结合不牢固

。 3、操作性冷装配操作简单方便,经济实用。热装配工艺繁杂,需工人反复对孔径尺寸进行检测;

压入装配要求孔和轴的中心线一致。 深冷装配箱的优势: 1、具有极限的低温,温度达-150℃,能极

大地满足冷装配工艺的温度要求。 2、采用新智能控温系统,可根据工艺需求设定所需温度参数、降

温速度及保温时间。 3、设备采用*的自复叠技术,使工件均匀、稳定、快速地降温。


其他推荐产品

更多

收藏该商铺

登录 后再收藏

提示

您的留言已提交成功!我们将在第一时间回复您~

对比框

产品对比 二维码 意见反馈

扫一扫访问手机商铺
在线留言