详细说明
应用概述 General of applications
★旋流流化床制粒包衣机是将流化床做成叶片式结构的流化床，并使叶片呈一定斜度，让气流从叶片的间隙通过，形成环流状的强大气流，使物料呈旋涡状似的有序运动，同时安装在侧壁的气动喷嘴将粘合剂或包衣液喷入呈旋涡状的物料层，从而将粉体制成颗粒或获得连续均匀的衣膜。
★其广泛用于粉体制粒和粉体、颗粒、丸的薄膜、肠溶、缓控释包衣，以及各种物料的掩味、防潮、防水、着色、隔热、隔离等包衣。
★LBF Turbojet fluid-bed granulator coater has vane-shape bottom of hopper which has a certain lean, let the air flow pass through the rift then form circle-shape strong air flow, it makes material rotate as regular turbojet movement. Meanwhile the pneumatic nozzle installed under left wall spray binder or coating liquid into turbojet material, in this way granulating or coating film can be obtained.
★It is widely used in coating of powder, granule, pellet, entericreleasing, slow and control releasing, and coating of taste masking, moisture-proof antioxidation, prevent water, heat insulation, coloration and separation etc.
设备特点 Features of equipment
★旋流驱动空气分配器，确保物料有序运动。
★旋流流态化，克服了沟流及死角现象。
★制得的颗粒多孔、速溶、真球度高、表面光泽度好、致密性强、不易破碎。
★吸潮性和流动性差的物料也能制成合格的颗粒。
★Rotational flow drives air distributor in order to guarantee that material can move in order.
★Fluidization of rotational flow, it overcomes channel flow and dead corner.
★The prepared granule is porous and can solve quickly, with high sphericity coefficient,good surface luster,certain intensity and is not easy to break.
★It can deal with low moisture-absorb and fluidity material to gain complete granule.
项目 ltem 规格 Specification | 0.5 | 5 | 10 | 15 | 30 | 60 | 90 | 120 | 200 | 300 | 500 | 800-1000 |
投料量 Capacity | kg/批 kg/batch | 0.5 | 5 | 10 | 15 | 30 | 60 | 90 | 120 | 200 | 300 | 500 | 按用户要求设计 By client |
风机功率 Power of fan | kw | 2.2 | 4 | 5.5 | 7.5 | 11 | 15 | 18.5 | 18.5 | 22 | 30 | 55 |
压缩空气 Compressed air | 压强 Pressure | Mpa | 0.6 |
耗量 Consumption | m3/min | 0.45 | 0.6 | 0.6 | 0.6 | 0.6 | 0.9 | 1.1 | 1.3 | 1.8 | 2.4 | 3 |
蒸汽 Steam | 压强 Pressure | Mpa | 0.4-0.6 |
耗量 Consumption | Kg/h | 6KW | 9KW | 53 | 71 | 95 | 143 | 167 | 183 | 343 | 381 | 450 |
主机尺寸 Installation size for reference | H1(mm) | 2600 | 2600 | 2300 | 2450 | 2450 | 3050 | 3050 | 3050 | 3500 | 3700 | 4050 |
H2(mm) |
|
| 250 | 320 | 340 | 490 | 540 | 590 | 690 | 790 | 890 |
H3(mm) |
|
| 2100 | 2250 | 2250 | 2850 | 2850 | 2850 | 3300 | 3500 | 3850 |
Ø1(mm) | 300 | 550 | 550 | 650 | 700 | 1000 | 1100 | 1200 | 1400 | 1600 | 1800 |
Ø2(mm) | 150 | 180 | 180 | 250 | 250 | 280 | 280 | 280 | 280 | 315 | 355 |
B1(mm) | 1550 | 1650 | 1010 | 1110 | 1160 | 1460 | 1560 | 1660 | 1860 | 2060 | 2260 |
B2(mm) |
|
| 1460 | 1760 | 1860 | 2460 | 2660 | 2860 | 3260 | 3660 | 4060 |
L(mm) |
| 850 | 1100 | 1100 | 1250 | 1530 | 1530 | 1650 | 1650 | 1750 | 1850 |
所有参数仅作参考，视物料情况，本公司拥有变更权利，并不另行通知。
All datas are used for reference only. According to the condition of material, our factory has the right to change but not notice, pardon!
