SZ
Technical Data for SZ
| 项目 Item | 单位Unit | 参数 Data | ||
| 合模力 Max. clamping force | KN | 1600 | ||
| 移模行程 Max. opening force | mm | 460 | ||
| 拉杆有效间距（V×H）Space between tie bars | mm | 480×480 | ||
| 允许的模厚（min-max） Mould height | mm | 180-500 | ||
| 模板zui大开距 Max. daylight | mm | 960 | ||
| 液压顶出力 Ejector force | KN | 45.2 | ||
| 液压顶出行程 Ejector stroke | mm | 115 | ||
| 液压顶出杆的总数Ejector quantity | | 5 | ||
| 螺杆的直径 Screw diameter | mm | 45 | 50 | 55 |
| 螺杆的长径比 Screw L/D ratio | L/D | 23.3 | 21 | 19.1 |
| 理论注射容积Theoretical shot volume | cm3 | 358 | 442 | 534 |
| 注射质量（PS料）Plasticising weight（PS） | g | 326 | 402 | 486 |
| 注射压力 Injection pressure | Mpa | 219 | 178 | 147 |
| 理论注射速率（PS料）Theoretical injection rate（PS） | g | 142 | 175 | 212 |
| 塑化能力（PS料）Plasticising capacity（PS） | g/s | 20.1 | 26.5 | 34.2 |
| 螺杆驱动扭矩 Screw torque | N.m | 1250 | ||
| 螺杆zui高转速 Max. screw rotate speed | r/min | 200 | ||
| 注射行程 Injection stroke | mm | 225 | ||
| 油泵电动机功率 Pump motor power | KW | 18.5 | ||
| 油泵zui高压力 Pump pressure | Mpa | 16 | ||
| 料筒加热功率 Heating power | KW | 13.6 | ||
| 加热区段 Heating zone | | 4 | ||
| 机器的外形 （L×W×H） Size | m | 5.3×1.35×1.9 | ||
| 机器的净重 Net weight | t | 5.6 | ||
| *型号International designation | | 1600-785 | ||
