进口水用减压阀(德国OLES奥莱斯阀门)
【进口水用减压阀】详细说明：
水用减压阀：法兰连接形式、弹簧薄膜式结构、密封面材料为橡胶铜合金、公称压力 PN10~PN16、阀体材料为灰铸铁或球墨铸铁的减压阀。该产品针对高层、超高层建筑设计，是解决高层建筑生活用水、消防用水系统中，要求流量大、灵敏度高等场合的理想产品。其性能更加*，*取代中间水箱，节约建筑中间水箱的费用，扩大建筑物的使用面积。水减压阀,水用减压阀在城市建筑,高层建筑的冷热供水系统中,可取代常规分区水管,节省设备。也可在通常的冷热水管网中,起减压稳压作用。,自来水减压阀本系列减压阀属于先导活塞式减压阀.由主阀和导阀两部分组成.主阀主要由阀座、主阀盘、活塞、弹簧等零件组成。导阀主要由阀座、阀瓣、膜片、弹簧、调节弹簧等零件组成。通过调节调节弹簧压力设定出口压力、利用膜片传感出口压力变化，通过导阀启闭驱动活塞调节主阀节流部位过流面积的大小，实现减压稳压功能。
Water pressure relief valve: flange connection type, spring film structure, sealing surface material for rubber copper alloy, nominal pressure PN10 ~ PN16, valve body material for gray iron or ductile iron pressure relief valve. This product is aimed at the design of high-rise and super-high-rise buildings. It is an ideal product to solve the high-rise buildings'domestic water and fire water systems, which require large flow and high sensitivity. Its performance is more superior, completely replacing the intermediate water tank, saving the cost of building the intermediate water tank, expanding the use area of the building. Water pressure relief valves, water pressure relief valves in urban buildings, high-rise buildings in the cold and hot water supply system, can replace conventional zoning water pipes, save equipment. It can also play the role of decompression and stabilization in the normal cold and hot water pipeline network. Tap water pressure relief valves This series of pressure relief valves belong to pilot piston type pressure relief valves. They are composed of main valve and pilot valve. The main valve is mainly composed of seat, main valve disc, piston, spring and other parts. The guide valve is mainly composed of seat, disc, diaphragm, spring, adjusting spring and other parts. The outlet pressure is set by adjusting the spring pressure, the diaphragm is used to sense the outlet pressure change, and the pilot valve opens and closes to drive the piston to adjust the flow area of the throttle part of the main valve, so as to realize the function of reducing pressure and stabilizing pressure.
【进口水用减压阀】特性：
1.减压阀的进口压力波动应控制在进口压力给定值的80-105，如超过该范围水管减压阀的性能会受影响。
2.通常水用减压阀的阀后压力Pc 应小于阀前压力的0.5 倍即Pc<0.5P1。弹簧活塞式减压阀的每一档弹簧只在一定的出口压力范围内适用超出范围应更换弹簧。
3.在介质工作温度比较高的场合般选用先导式活塞式减压阀或先导式波纹管减压阀。
4.介质为空气或水液体的场合一般宜选用直接作用薄膜式水减压阀或先导式薄膜式减压阀。
5.介质为蒸汽的场合宜选用先导活塞式减压阀或波纹管式减压阀。
6.为了操作、调整和维修的方便减压阀一般应安装在水平管道上。
【进口水用减压阀】结构特点和用处：
减压阀属于直接作用式薄膜弹簧减压阀。主要由调节弹簧、膜片、活塞、阀座、阀瓣等零件组成。利用膜片直接传感下游压力驱动阀瓣，控制阀瓣开度完成减压稳压功能。
水用减压阀在城市建筑、高层建筑的冷热供水系统中，可取代常规分区水管，节省设备。也可在通常的冷热水管网中，起减压稳压作用。
本产品调压、稳压动作平稳，适用于水和非腐蚀性液体介质的管路。
