蒸馏水贮罐
DISTILLED WATER STORAGE TANK
本系列卧式蒸馏水贮罐严格遵循《药品生产质量管理规范》GMP总则(1998年修订版)第三十一、三十二条要求，根据GB150-98《钢制压力容器》、JB/T4735-97《钢制焊接常压容器》要求进行设计，制造验收。
1. 容器保温材料采用耐高温、抗老化聚胺脂发泡或珍珠棉。
2. 接口采用国际通用标准ISO快装卡盘式，内胆选用进口不锈钢SUS316L或SUS304制造，内表面镜面抛光至Ra≤0.28μm,外表面抛亚光，镜面、喷砂或冷轧原色亚光，符合GMP医药标准。
3. 管口设有液位计口（静压式、电容式、无触点式、超声波式、玻璃管式）、空气呼吸器、温度计（数显式或表盘式）、CIP清洗口、SIP灭菌口、进出液口及卫生人孔等。
4. 容积有1000L-30000L等规格，也可根据客户实际需要进行设计、制造。
5. 随机附送有关GMP验证资料（含材质报告、外购件合格证、验证表格等）。
The horizontal distilled water tank series strictly tally with the 31st and 32nd clauses of ' Medicine Production Quality Management Norm——GMP General Principles' (1998 Revised Edition), and is designed, manufactured and accepted according to the requirements of GB150-98 'Steel Pressure Vessel' and JB/T4735-97 ' Steel Welding Normal Vessel' .
1. Heat preservation material of the vessel adopts high-temperature resistant and anti-aging polyurethane blister or pearl cotton.
2. Joints adopt international general ISO package chuck, inner container adopts imported stainless steel SUS316L or SUS304, internal surface is polished to Ra≤0.28μm, and external surface polishing, mirror polish, sａnd blasting or cold-rolled nature-color surface polishing. All is in accordance with GMP medical standards.
3. Orifice is set with level gauge (static-pressure type, capacitance type, non-contact type, ultra-sonic type and glass tube type), air respirator, thermometer (digital display type or dial plate type), CIP cleaning mouth, SIP sterilizing mouth, liquid entrance-exit gate and sanitary inlet.
4. Volume Specification: 100L-30000L or to be designed and manufac-tured at customers' actual request.
5. Relevant GMP testing data are attached in the machine.(including ma-terial report, external com-ponents certificate of quality and verification form).
卫生级容器
SANITATION CONTAINERS
洪都所有不锈钢容器均按GB2880-81《钢制焊接常压容器技术条件》或GB150-89《钢制压力容器技术条件及新版GMP、FDA标准进行设计、制造、试验和验收》采用SUS304或316L材料，内表面采用镜面电解抛光，抛光精度达Ra0.28μ，容器桶身与上下封头过渡均采用旋压R角成型，平整光滑，均无卫生死角，确保容器始终处于卫生无菌状态。外表面采用抛光、喷砂、磨砂或冷轧原色哑光等多种表面处理方式，使容器在任何场地都能显示出它的的品质。
All stainless vessels of brａnd are designed, manufactured, tested and checked according to GB2880-81 "Technical Conditions For Steel Welded Normal Pressure Vessels" or "GB150-89 "Technical Conditions For Steel Pressure Vessels and GMP, FDA Standards (new versions)". Products adopt SUS304 or 316L material, and their inner surface adopts mirror surface electrolytic polishing,with polishing precision of Ra0.28μ. Transition between vessel body and upper/lower end enclosures all adopts rotary press R-angle modelling to ensure smoothness and cause no hygienic dead angles, as well as ensuring hygienic state of vessels at all times.External surface adopts many kinds of surface treatment modes such as polishing, sandblasting, frosting or cold-rolling primary color dumb lightness to embody the superior quality of vessels at any locations.
