NX浓稀配罐
NX THICK THIN MIXING TANK
用途
主要用于大输液、小针剂及其它溶解、灭菌与调配作用。
USAGE
It is mainly used for the large transfusion, small injection as well as solution, sterilization and preparation etc.
性能
1. 本系列设备具有加热、冷却和保温、搅拌调配功能，容器按《钢制压力容器技术条件》进行设计、加工。
2. 规格有0.05m3 -5.0m 3不同容积供选择，还可以根据用户实际工艺需要进行设计、加工。
3. 采用夹层结构，具有加热面积大、焊接少等优点。
4. 轴封采用卫生级硬质合金与碳化硅204平衡型机械密封，耐磨耐压，减速机转速为60-82转/分。也可采用变频器来调速。
5. 接口采用国际通用标准ISO标准快装卡盘式，材料为进口316L或304，内表面镜面抛光Ra≤0.28μm，外表面亚光或镜面抛光处理。
6.液位计有玻璃管液位计、静压传感器式液位计、超声波液位计可供选择。
7. 结构形式分为上下椭圆封头或下反凸底上椭圆封头结构，保证药液不残留。
8. 夹套结构形式分为标准夹套，外盘管夹套，蜂窝夹套三种供选择。
此种结构为上下椭圆封头与标准夹层夹套组合，具有夹套空间大，加热面积大，减少焊缝，内胆平整保证物料不挂壁。外形美，结构简单耐用等优点。其缺点为高度较高。另将减速机如改为蜗轮蜗杆卧式减速机可降低高度250-330mm左右。
PERFORMANCE
1. The series of equipment have the functions of heating, cooling, heat preservation and mixing preparation. The vessel carries out design and processing according to "Technical condition for steel made pressure vessel".
2. The specifications for selection are 0.05m3-5.0m3 different volumes. It can also carry out the design and processing according to the actual technology requirements of customers.
3. Adopt interlayer structure, with the advantages such as large heating area and small welding etc.
4. The shaft seal adopts sanitary level hard alloy and silicon carbide 204 balancing mechanical seal, which is anti-abrasion and anti-press. The rotation speed is 60-82 r/m, and the speed can also be regulated by frequency converter.
5. The interface adopts internationally general-use standard ISO standard rapid installationchuck type, and the material is imported 316L or 304. The mirror polishing of internal surface Ra≤0.28μm, and the external surface adopts semi-luster polishing or mirror polishing treatment.
6. The liquid meters for selection are glass tube liquid meter, static pressure sensor type liquid meter and supersonic wave liquid meter.
7. The structure forms are divided into upward and downward round sealing head or downward reverse convex bottom upward round sealing head structure, which can guarantee no residual of liquid medicine.
8. The jacket structure forms for selection are divided into standard jacket, external coiled tube jacket, and honeycombed jacket.
The structure is the combination of upward and downward round sealing head and standard layer jacket. It has large jacket space and large heating area, which can reduce the welding seam. The internal bladder is neat, which can guarantee that the material will not be hung on the wall. It has advantages such as beautiful appearance, simple structure and durability. The disadvantage is that it is too high. Additionally, if changing the reducer as horizontal worm gear reducer, the height can be reduced for about 250-330mm.
