该机是一种固定装置的垂直机械输送设备，主要是用于粮食、食品、饲料和化工等部门颗粒和粉状物料的垂直提升输送。
It is a kind of fixed vertical conveying equipment, mainly used in grain, food, feed, chemical engineering and other industries for vertical lifting & conveying of granular & powdery materials.
特点：
Characteristics:
1、驱动功率小,采用流入式喂料、诱导式卸料、大容量的料斗密集型布置.在物料提升时几乎无回料和挖料现象,因此无效功率少。
The driving power is small; flow-type feeding & induction-type discharge modes are adopted; large-capacity hoppers are set intensively. It is almost free of material return & excavation phenomena during material lifting, therefore, there is little reactive power.
2、专用模具压制多层咬边的加强筒体，强度高、密封性好。
Special mould is adopted to compact multi-layer undercut strengthened drum, and high strength and satisfactory sealing performance can be achieved.
3、提升范围广,这类提升机对物料的种类、特性要求少,不但能提升一般粉状、小颗粒状物料,而且可提升磨琢性较大的物料.密封性好,环境污染少。
It has a wide lifting range; less requirements for category and characteristics are proposed; it can lift general powdery & granular materials, as well as materials with relatively high milling performance. Satisfactory sealing performance and little environmental pollution can be guaranteed.
4、使用寿命长,提升机的喂料采取流入式,无需用斗挖料,材料之间很少发生挤压和碰撞现象。本机在设计时保证物料在喂料、卸料时少有撒落,减少了机械磨损。
It has a long service life. Flow-type feeding mode is adopted, and it is unnecessary to excavate materials with bucket; besides, there are little material squeezing and collision phenomena. The equipment is designed to ensure less material loss during feeding and discharging, and mechanical wear is reduced.
技术参数：
Technical parameters:
| 规格型号 Spec. & model | 畚斗规格 Spec. of winnowing pan | 传动比 Drive ratio | 畚斗带线速（m/s） Line speed of winnowing pan belt (m/s) | 产量（t/h） Output (t/h) | ||
| 粉料 Powdery materials | 粒料 Granular materials | 粉料 Powdery materials | 粒料 Granular materials | |||
| TDTG26/13 | DQ1311 DS1311 | 9-23 | 0.8-1.2 | 1.2-2.2 | 1.2-2 | 6.5-9.5 |
| TDTG26/18 | DQ1814 DS1814 | 9-23 | 0.8-1.2 | 1.2-2.2 | 2-4.5 | 15-20 |
| TDTG26/23 | DQ2314 DS2314 | 9-23 | 0.8-1.2 | 1.2-2.2 | 5-8 | 16-25 |
| TDTG36/13 | DQ1311 DS1311 | 9-23 | 1.2-1.6 | 1.6-3 | 2-3 | 8-12 |
| TDTG36/18 | DQ1311 DS1311 | 9-23 | 1.2-1.6 | 1.6-3 | 4.5-6 | 16-17 |
| TDTG36/23 | DQ1311 DS1311 | 9-23 | 1.2-1.6 | 1.6-3 | 7-10 | 20-32 |
| TDTG36/28 | DQ2816 DS2816 | 9-23 | 1.2-1.6 | 1.6-3 | 8-11 | 25-40 |
| TDTG40/18 | DQ1814 DS1814 | 9-23 | 1.3-1.8 | 1.8-3.3 | 5-7 | 22-34 |
| TDTG50/23 | DQ2314 DS2314 | 11-29 | 1.3-1.8 | 1.7-3.4 | 8-12 | 30-50 |
| TDTG50/28 | DQ2816 DS2816 | 11-29 | 1.3-1.8 | 1.7-3.4 | 9-13 | 40-65 |
