XT-K180 型全自动薄膜捆扎机

XT-K180 Full-automatic Film Strapping Machine

工作原理：

  1盒子经输送皮带进入积盒架。

  2当盒子叠加达到设定的数值时，推盒汽缸开始工作，把多层盒子由积盒架推*板，同时拉动捆包膜，压盒板向下压紧盒子后推盒汽缸退回。

  3推盒汽缸退回后上热封板开始工作，当汽缸向下作用时同时拉动捆包膜并压紧捆包膜，下热封开始工作，切断并热封住捆包膜。

  4热封完成后，上下热封汽缸及压盒汽缸复位，一次捆包完成。

  5当推盒汽缸复位后顶盒汽缸立刻工作，当上下汽缸复位时叠盒动 作已经完成，开始下一次捆包！

XT-K180 型全自动薄膜捆扎机

Operating principle:

1 Boxes enter box- accumulating shell via conveying belt.

2 Box-pushing cylinder starts to push boxes onto upper plate from box-accumulating shell when boxes reach set number and draws box-strapping film at the same time. Box-pushing cylinder will go back after box-pressing plate compresses boxes.

3 Upper heat-sealing plate starts to run after box-pushing cylinder goes back. Box-strapping film is being drawn and compressed while box-pushing cylinder is going back, next, bottom heat-sealing begins to cut and heat-seal box-strapping film.

4 Upper and bottom heat-sealing cylinder reset after finishes heat sealing, that is to say, one box strapping is finished.

5 After the resetting of box-pushing cylinder, box-peaking cylinder starts to work at once. Box-stacking will be finished after upper and bottom cylinders reset, then the next time of box strapping will begin.

产品介绍

1、设备型号：XT-K180型

2、产品概述：该机采用进口电气元件，PLC控制系统、人机操作界面、具有运行稳定、操作简单等特点；主要用于食品、药品行业盒装产品的组合捆扎。

Product introduction

1、Type：XT-K180

2、Overview: this machine runs stably and is easy to operate with the use of imported electrical elements, PlC control system and human-machine operation surface, used to strap combinedly products packaged with boxes in food and medicine industries.

技术参数Technology parameters：

XT-K180 型