| STANDARD |
| TEMPERATURE & HUMIDITY CHAMBER |
| BENCH-TOP(Model:th-1ST-A;TH-2ST-A) |
| Humidity controllable Range (at room Temp.20℃ |
|
| *It can separately test high temperatures, low |
| Temperatures and costant temperature and himidity. |
| *All programmed instructions are microprocessor |
| -controlled, with PID and automatic calculation |
| To ensure precise and stable temperature and |
| Humidity control. |
| *Heating, cooling, humiditying and dehumiditying |
| Functions are all sleperate, for increased effici- |
| Ency, lower energy and maintenance costs and |
| Longer machine life. |
| *In the case of a thermostat breakdown, a war- |
| Ning light switches on and temperature setting |
| Is changed to standard. |
| *Heat is evenly distributed throughout the testing |
| Chamber to ensure a uniform testing temperature. |
| | | | | |
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| Mode | TH-1S- | TH-2S- | TH-3S- | TH-4S- |
| Inter Dim. | 40×50×40 | 45×60×45 | 50×75×60 | 100×100×80 |
| W×H×D(cm) |
| External Dim. | 92×130×70 | 97×140×75 | 102×155×90 | 152×180×110 |
| W×H×D(cm) |
| Temp. Range | -70℃~100℃(+150℃)(A:0℃ B:-20℃ C:-40℃ D:-60℃ E:-70℃ |
| *RelativeHumildity Range | 20%~98%R.H. |
| Features | Temp. & huml.constancy | ±0.3℃；±2.5%℃ |
| Temp. & humi. uniformity | ±0.5℃; ±4%R.H. |
| Indication resolution | 0.1℃;0.1%R.H./0.01℃;0.1%R.H. |
| Heat-up time (min.) | About 30 to 50 |
| Pull-down time (min.) | About 45 to 120 |
| Material | Exterior | SUS#304 stainless steel plate |
| Interior | SUS#304 stainless steel plate |
| Insulation | PU & Fiberglass wool |
| Systems | Circulation | Siroco fan |
| Heating | SUS#304 stainless steel high-speed heater |
| Humidifying | Surface evaporating system |
| Cooling | Airtight compressor+evaporator fins+air-cooling condenser |
| Dehumidifying | ADP Critical dewpoint cooling/dehumidifying method |
| Control | Digital electronic indicators, programmable computer controller+S.S.R. |
| Other components | Vacuum glass inspection window, cable p：ort(Φ35mm),control status indicator lights, chamber lamp, experiment separation shelves (freely adjustable 2 pcs). |
| Savety devices | Overheating prevention circuit-breaker,compressor overload protection, control system overload prevention, humidifying system overheating and drying out prevention, breakdown indicator light. |
| Power source | AC 1Φ/3Φ,220V±10%,50/60HZ. |
